How to ensure the safety of pipe beveling at work is a topic of concern to every operator. In fact, the dangers are caused by people's carelessness. Let's talk about how to operate the pipe beveling machine during operation.

****, the strength and accuracy of the cutting tools or molds on the pipe beveling machine must meet the cutting requirements of the materials to be cut. If they do not meet the requirements, they must respond to the leaders in time, and the cutting tools must be sharp. It is safe to test whether the cutting tools are installed stably and fastened reliably by hand. In the transmission belt, you should see whether there is a protective cover, Avoid damaging yourself by splashing the fragments of materials. It is forbidden to disassemble them during operation.

Second, open the pipe beveling machine before operation and let it idle for a while to see if there are any abnormalities. Only when there is no, can we continue the operation.

Third, the cutter row and cutter should be firm and reliable. If they are not firm, it will be a big trouble. In case they fly out during operation, the consequences will be unimaginable, so be sure to check the firmness.

Fourth, when working, please don't put your body too close to the cut material, because even if you bring protective equipment, accidents may occur. It is strictly forbidden for the operator to directly wipe the iron filings on the groove with his hands. You can bear it if you look at it. Wiping with your hands is simply a baptism of blood.

Fifth, in addition to the operators, when using the pipe beveling machine, no one is allowed to approach, even if it stays for one second. The splashed things are easy to hurt people.